New ✨ Flooring Supply Shop Ceramic Groove Tile Series Bullnose Floor Wall Bathroom Kitchen Shower, Cream 😉

CERAMIC GROOVE TILE SERIES BULLNOSE – CREAM

Bullnose for finishing your tile job. Made with waterfall glaze technology to match the Groove tiles

** Price is per Piece **

• Material: White Body Ceramic
• Piece Size: 3/4″ x 12″
• Colors: Cream
• Finish: Glossy

Installation Tips:

• The tiles are blended in the boxes however, due to the variation of color in these tiles, it is best to blend on the job before final installaton.
• Specific colors ranges cannot be hand selected as boxes are pre mixed and this is the way we have intended the product to look.
• You can cut this product with a regular stone blade. No sealing required.

Notes:

• The color “Shark Skin” has multiple faces of printed imagery. These tiles will come mixed in the boxes.
• The variation and blending of this product are the way we have intended them to look.
• We will not be able to hand select specific tiles, as it will effect the beauty of the range.
• The colors may slightly very from batch to batch and sheet to sheet.

Recommended Substrates:

• Properly cured mortar beds-ANSI A108.1B (cured a minimum of 7 days).
• Cementitious backer units (CBU)-ANSI A118.9.
• Concrete slabs cured for 28 days minimum.
• Gypsum board (dry areas only)-ASTM C1396 or ASTM C1396M-04.
• Note: An ANSI A108A-2.1.8 membrane is required behind all CBU installations in wet areas.

Note: All glass, foil backed glass, stainless steel and copper metal, aluminum, resin metal and blended element products must be set a minimum of 8″ away from any naked flame.